Tag: DIY

  • Introducing the Ikea table top petite hydroponic system

    Introducing the Ikea table top petite hydroponic system

    after_driptower2

    What We Grew
    If you are wondering what happen to the Hydro Drip Tower after the mini maker faire, here are the answers. They have grown quite well under the bug net. The root have grown into the water itself.

    But it has some bug problems. It always happen when we bring the plants outside. We are hoping that the plants will start producing flowers and give us seeds that are more resistant to the bugs, stronger than before.

    after_driptower1
    after_driptower3

    Copyright @ Fatbars Limited 2026

  • DIY project at Mini Maker Faire 2014

    DIY project at Mini Maker Faire 2014

    ?;

    How We Got Started
    Here we are at Mini Maker Faire 2014 Hong Kong, showing off our DIY HydroDrip and Hydrodalek project. This year we are trying vertical growing with PVC pipes that we built. A internal blue bucket spray system with pvc pipes in a circular position. Thank you for all the people that came visiting us. Here are the diagrams illustrations, showing how the system works. After the faire, the plants are going back to the house and continue outdoor on the balcony.

    DSC00402
    DSC00449
    DSC00385
    Print
    Print

    Copyright @ Fatbars Limited 2026

  • Bugs that killed my Basil. Why we restart again

    Bugs that killed my Basil. Why we restart again

    I didn’t post for a while. It has been very busy with work and loosing my Basil Plants at the same time. The plants are all indoor plants. Right before Christmas, I have to up root and remove all the Basil plants that we were growing. A few of the plants was infested by small sap sucking bugs. I looked them up online and come to the conclusion that they eventually will turn into Gnats. I though they were Aphids. The truth is I could not tell if they are Gnats or Aphids. I notice there are black flying black insects that I caught with my yellow sticky paper. The black insects looks like Gnats. So are they Aphids or Gnats ? I don’t know. Anyway, it has become uncontrollable and I end up having to restart.

    ø;

    Copyright @ Fatbars Limited 2026

  • Adafruit gemma LED sequin project

    Adafruit gemma LED sequin project

    Welcome to Fatbars’ new channel : Feed your brains. This episode we explore Adafruit LED Sequin project, by adding a little blinks into our wearable tech project, right here in Hong Kong.

    Copyright @ Fatbars Limited 2026

  • Xperience Director in action at Maker faire Hong Kong 2017

    Xperience Director in action at Maker faire Hong Kong 2017

    Fatbars’ guided VR experience ‘Xperience Director’ at Maker Faire Hong Kong 2017. We had so much fun. Thank you so much for coming by. Non stop VR fun, sharing immersive VR experience with the whole family, at the same time. We brought our guests, from a wedding at Disneyland Hotel to the quiet village in Ma Wan Hong Kong. Then down to Singapore Gardens by the Bay. Up the cloud forest. All on cue and in control.

    Copyright @ Fatbars Limited 2026

  • Design 3D models in Virtual Reality and 3D print out

    Design 3D models in Virtual Reality and 3D print out

    Both of us were trained on very expensive 3D graphics animation software that no longer exists today (it was the 80s). Maybe you have heard of them : Alias Wavefront, Softimage, TDI ? They don’t exist anymore. Currently, we are Blender fans. We did this thought experiment a while back but wanted to reshare our experience here. The question was “ Is it possible to go straight from Virtual Reality, design and make the 3D models file. Go directly to do a 3D printer without needing to fix the model on a regular desktop software. No Maya, No Cinema4D, No Blender. No AutoCad.

    Not only did it work then, it works better than ever now with the crazy improvement in both technologies. Designers, time to leave your mouse and dive into VR frontier. Your next creation awaits. It was a learning curve. Not knowing what size you are modeling in or the limitation of printing the design out was a challenge. From Digital to Analog.

    Personally, it felt really good to see my 3D model design up close and personal, able to build and ‘walk around’ my 3D world. My robot in VR was 3 storey high! It was actually quite tiny when it got 3D printed out.

    Thank you for reading.Have you tried to design in VR and 3d print out your work? Let’s discuss.

    #learnsomethingnew #learn #calledtobecreative #education #inspiration #learningthroughplay #creativebiz #creativeentrepreneur #creativelife #growyourbusiness #digitalmarketing #productivitypotential #creativityfound #growyourbusiness #creativebusiness #inspirationbusiness #selfgrowth #productivitytools #feedyourbrains #businessofdesign #gravitysketchvr #conceptsketch #digitalart #virtualrealityexperience #vrartists #doitfortheprocess #3dprinting #customdesign #freepik

    FYB2.002-1024x1024
    FYB2.003-1024x1024
    FYB2.007-1024x1024
    FYB2.001

    Copyright @ Fatbars Limited 2026

  • Virtually Makerfaire 2020 on 23rd May 2020

    Virtually Makerfaire 2020 on 23rd May 2020

    Event Alert. Virtually MakerFaire will have 24 Hours of Presentations, Workshops, Demos, and Exhibits Across All Time Zones on 23rd May 2020. Across the world, makers have responded to shortages of medical supplies and equipment with agile designs, adaptive distributed manufacturing, and community organizing. You get to from the people behind this extraordinary civic response at VIRTUAL MAKERFAIRE 2020.

    Visit https://makerfaire.com/ to see the lists of presentations by fellow makers around the world.

    We had been going and participating at Maker Faires around the world. We even interviewed some of the makers when we went to World MakerFaire in New York. Check out our makers’ interviews list on Youtube here.shorturl.at/lvRTW (Fatbars Makerfaire New York Playlist)

    Nothing can compare to visiting one of these faire in person. The communities of sharing and learning is awesome. For now, at least some of the makers get a chance to showcase and present their work in a safe environment.

    “ It is this makers’ history that now critically comes into play with the coronavirus, for the spirit of hacking, making, and cooperative learning, going on around the world is based on a straight-out-of-Maker Faire ethos. “ quote from fast company. Show your support by showing up at the event. See you there.

    #showyoursupport #supportyourcommunity #make #makerfaire #event #online #create #fastcompany #makingadifference #learning #makermovement #3dprinting #makersgonnamake #doitfortheprocess #learnsomethingnew #calledtobecreative #inspiration #fastcompany

    FYB_Makerfaire.002-1024x1024
    FYB_Makerfaire.004-1024x1024
    FYB_Makerfaire.008-1024x1024
    FYB_Makerfaire.001

    Copyright @ Fatbars Limited 2026

  • Supplying Learning Electronics to Hack-O-Life Hackathon 2016

    Supplying Learning Electronics to Hack-O-Life Hackathon 2016

    Hack-O-Life is a competition (hackathon) on 12 – 13 November co-organised by AIA, Cisco and Hong Kong University of Science and Technology. There aim is to explore innovative ideas to address “Health” and “Aging” considerations in Hong Kong. Here is the link to the event. Fatbars was approached to be the main supplier for this event. Electronics included Adafruit Industries, arudino, rasberry pi etc. Here is Sze will the parts covering the whole table at our office.

    Hack-O-Life is an excellent opportunity for you to experiment with new platforms, meet new friends and build cool stuff. We welcome university students in Hong Kong & Mainland China, and also local startups companies. Contact Fatbars for your next Hackathon.

    hack1
    hack2
    hack4

    Copyright @ Fatbars Limited 2026

  • Game of Horns – Fun with 3D printing + Adafruit Flora and Gemma

    Game of Horns – Fun with 3D printing + Adafruit Flora and Gemma

    Having fun making and programming gemma in this project : Game of Horns. Enjoy!

    Copyright @ Fatbars Limited 2026

  • Robot • TriRobot Maker Interview with Keith Yung and Brian Ho

    Robot • TriRobot Maker Interview with Keith Yung and Brian Ho

    We went to the Tri Robot head quarters and interview the robot maker Keith Yung and Brian Ho. They talk about how they got started, what inspires them and what keep them going.

    Copyright @ Fatbars Limited 2026